Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Laser beam welding of atmosphere aluminium die cast material using high frequency beam oscillation and brilliant beam sources

 
: Dittrich, Dirk; Jahn, Axel; Standfuß, Jens; Beyer, Eckhard

:
Volltext urn:nbn:de:0011-n-4230574 (684 KByte PDF)
MD5 Fingerprint: e9ef2d8fd0163f4ec89592270d0e742a
Erstellt am: 01.11.2017


Leyens, Christoph (Laser Materials Processing, Conference Chair) ; Laser Institute of America -LIA-:
ICALEO 2016, 35th International Congress on Applications of Lasers & Electro-Optics. Online resource : October 16-20, 2016, San Diego, California, USA
Orlando, Fla.: LIA, 2016
https://www.lia.org/store/product/2016-icaleo-conference-proceedings-electronic-access
Paper 1204, 7 S.
International Congress on Applications of Lasers & Electro-Optics (ICALEO) <35, 2016, San Diego/Calif.>
Englisch
Konferenzbeitrag, Elektronische Publikation
Fraunhofer IWS ()

Abstract
In serial production of components for automotive applications such as cooling and air-conditioning systems, aluminium die-cast material is frequently used due to its excellent castability. The aim of providing light weight components can be approached with thin walled cross sections even for complex structural parts. However, cast components are usually connected to semi-finished products, such as profiles or tubes. The connections have to be mostly pressure tight. The joining technique for those applications has to be highly productive to obtain high component outcome as well as cost-efficient. Laser beam welding techniques are especially suitable for those tasks. Die-cast components have limited or no weldability due to their manufacturing process. Reasons for that are entrapped gases within pores or cavities under high pressure conditions. Furthermore, the mold release agents forthe die-cast process are inappropriate for obtaining homogeneous and sound weld seams. Consequently, a high amount of pores in the weld seam and stochastic melt pool blow-outs occur, which prohibit mostly the use of the component. To solve these issues a new welding technique, remoweld®T, has been developed at Fraunhofer IWS. The unique method has been extensively tested and transferred to serial-production. The decisive step was to use laser sources with brilliant beam quality in combination with a high frequency beam oscillation within the melt pool. In this paper the technological approach will be presented. With the remoweld®T method it was possible to obtain homogeneous weld seams with low porosity and a strongly reduced distortion for the first time. Minor component tolerances and a reproducible joining technique with a high output for serial production can be achieved.

: http://publica.fraunhofer.de/dokumente/N-423057.html