Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Scanning acoustic GHz-microscopy versus conventional SAM for advanced assessment of ball bond and metal interfaces in microelectronic devices

 
: Vogg, G.; Heidmann, T.; Brand, S.

:

Microelectronics reliability 55 (2015), Nr.9-10, S.1554-1558
ISSN: 0026-2714
Englisch
Zeitschriftenaufsatz
Fraunhofer IWM ()

Abstract
The current paper describes the application of acoustic GHz-microscopy in comparison to conventional scanning acoustic microscopy for the investigation of ball bond and metal interfaces of microelectronic devices. The non-destructive ultrasonic inspection method is based on a back-side approach with the ultrasonic pulses applied through the back side of the exposed and thinned Si chip. A direct comparison between the innovative ultra-high frequency setup using special highly focusing acoustic lenses enabling the application of up to 1 GHz acoustic frequency and a standard SAM setup based on a conventional 300 MHz transducer is presented for several samples. It is demonstrated that the lateral resolution can be drastically increased from 10–15 μm for the conventional setup to about 1 μm for the ultra-high frequency setup which thereby allows for new applications such as a reliable 2-dimensional quality assessment even of small ball bond interfaces with dimensions of a few 10 μm.

: http://publica.fraunhofer.de/dokumente/N-418031.html