Publica
Hier finden Sie wissenschaftliche Publikationen aus den FraunhoferInstituten. Analysis of filter cake formation using computational fluid dynamics  discrete element method (CFDDEM) simulation
 Filtech Exhibitions Germany, Meerbusch: FILTECH 2016. Proceedings. USBStick : October 11  13, 2016, Cologne Germany Meerbusch: Filtech, 2016 ISBN: 9783941655126 ISBN: 3941655124 Paper L1203 
 International Conference & Exhibition for Filtration and Separation Technology (FILTECH) <2016, Cologne> 

 Englisch 
 Konferenzbeitrag 
 Fraunhofer ITWM () 
 cake filtration; compressible cake; pressure drop; twoway coupling; CFDDEM 
Abstract
Cake filtration is one of the basic solidfluid separation process. It is known that in many cases the cake has a nonuniform structure. Depending on a number of factors, the formed cake may or may not consolidate during compression. In short, an indepth understanding of cake formation is required for the optimal design of the filtration process. In this work, we aim to acquire an indepth understanding of the various factors affecting the structure of the cake with the help of numerical studies. As the suspension is dense, the flow is affected by the suspended particles which in turn affect the particle dynamics. This effect is captured by twoway coupling between the flow and the particle solvers (OpenFoamLIGGGHTS). Moreover, the suspended particles come in contact with each other after which they may deform rebound, permanently stick at the point of contact, or may remain in contact but roll down to new positions. The Discrete Element Method (DEM) is used to model such micromechanisms. The contact model used in DEM has a set of input parameters like coefficient of restitution, sliding friction, rolling friction, and the work of adhesion. The measurement of these parameters for micron sized particles is a challenging task. In this study, we obtained a set of parameters by comparing the volume averaged void fraction of the cake predicted by CFDDEM simulation to the experimental values. It is observed that the work of adhesion is the most important parameter affecting the cake structure of fine particles. Further the factors affecting the pressure drop across compressible and incompressible cake are discussed based on the results of numerical studies.