Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Low heat input gas metal arc welding for dissimilar metal weld overlays part I: The heat-affected zone

 
: Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael

:

Welding in the world 60 (2016), Nr.3, S.459-473
ISSN: 0043-2288
Englisch
Zeitschriftenaufsatz
Fraunhofer IPK ()
nickel alloys; lowalloy steels; GMA surfacing; DIP transfer; coarse-grained heat-affected zone; microstructure; clad steels

Abstract
Dissimilar metal weld overlays of nickel base alloys on low alloy steel components are commonly used in the oil and gas, petro-chemical, and power generation industries to provide corrosion and oxidation resistance in a wide range of service environments and temperatures. Traditionally, weld overlays are produced using cold or hot wire gas tungsten arc welding (GTAW). Potential advantages of cold metal transfer (CMT) welding, a low heat input gas metal arc welding process, over the conventional GTAW in production of weld overlays were evaluated. Metallurgical characterization was performed on CMT overlays of Alloy 625 filler metal on Grade 11 and Grade 22 steels. Significant grain refinement was found in the high temperature HAZ compared to the traditional coarse-grained HAZ in arc welding. Evidences of incomplete carbide dissolution, limited carbon diffusion, and incomplete transformation to austenite were also found. These phenomena were related to high heating and cooling rates and short dwell times of the high-temperature HAZ in austenitic state. Tempering effects in the steel HAZ were identified, showing a potential for development of CMT temperbead procedures. Based on the results of this study, the steel HAZ regions in CMT overlays were classified as high-temperature HAZ and intercritical HAZ.

: http://publica.fraunhofer.de/dokumente/N-399512.html