Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Solar cells with epitaxial or gas phase diffused emitters above 21% efficiency

 
: Rachow, T.; Milenkovic, N.; Steinhauser, B.; Benick, J.; Janz, S.; Hermle, M.; Reber, S.

:
Volltext urn:nbn:de:0011-n-3697784 (531 KByte PDF)
MD5 Fingerprint: a2224b4f760ad3ca0ba0b250d34e76a3
(CC) by-nc-nd
Erstellt am: 10.9.2016


Energy Procedia 77 (2015), S.540-545
ISSN: 1876-6102
International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <5, 2015, Constance>
Englisch
Zeitschriftenaufsatz, Konferenzbeitrag, Elektronische Publikation
Fraunhofer ISE ()
Materialien - Solarzellen und Technologie; Silicium-Photovoltaik; Dotierung und Diffusion; APCVD; vapor deposition; formation; epitaxy; solar cells

Abstract
The formation of high efficiency epitaxial emitters by atmospheric pressure chemical vapour deposition (APCVD) for wafer based solar cells as well as thin film solar cells has several advantages compared to the standard diffusion by tube furnace. These advantages include a short process time of only 2-7 min, no need for wet chemical etching after the deposition and an adjustable emitter profile, i.e. doping and depth can be adjusted independently. Simulations by PC1D show the potential of epitaxial emitters featuring low contact resistance in combination with high shunt resistance, a good blue response and low j(0e) values [1]. The emitter profiles can be designed in the range from 1x10(17) cm(-3) up to 1x10(20) cm(-3) for p-type and n-type emitters. In this work the fabrication process and the epitaxial emitter profiles have been adjusted to improve layer quality and to match the passivation and metallisation of high-efficiency concepts. These optimisations resulted in solar cells with an efficiency of 21.0% and an open-circuit voltage of 668 mV, a short circuit current of 39.2 mA/cm(2) and a fill factor of 80% for n-type solar cells with epitaxial boron emitter. Additionally, a selective deposition process has been developed which allows the structuring of the epitaxial emitter. Apart from the epitaxial approach an emitter formation process based on gas phase diffusion [2] using diborane as dopant gas in the APCVD reactor has been developed. This process includes most of the advantages of the epitaxial emitter, i.e. no silicate glass growth and a single side process. N-type PERL type solar cells featuring this emitter result in an efficiency of 21.7% with an open-circuit voltage of 675 mV, a short-circuit current of 40.8 mA/cm(2) and a fill factor of 78.7%. The realisation in industrial scale is in principle possible by using the ProConCVD in-line reactor developed at Fraunhofer ISE [3].

: http://publica.fraunhofer.de/dokumente/N-369778.html