Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Brittle failure of metallic foams under tensile and cyclic loading - experimental studies and standardization

Sprödbruch von metalischen Schäumen unter Zug- und zyklischen Belastungen
 
: Krupp, Ulrich; Nesic, Srecko; Hipke, Thomas; Aggerter, Johannes

:
Volltext urn:nbn:de:0011-n-3605236 (676 KByte PDF)
MD5 Fingerprint: 7b96334f065c63f5cd2a475b83940498
Erstellt am: 9.10.2015


MetFoam 2015, 9th International Conference on Porous Metals and Metallic foams Technology. Book of Abstracts : August 31st to September 2nd 2015, Barcelona
Barcelona, 2015
International Conference on Porous Metals and Metallic foams Technology (MetFoam) <9, 2015, Barcelona>
Englisch
Abstract, Elektronische Publikation
Fraunhofer IWU ()
aluminium foam; tensile and cyclic testing; brittle failure of metallic foams; standardization of cellular metalls

Abstract
Based on a series of tensile and cyclic testing on various cellular materials including open porous metal sponges, aluminum foam with and without foaming skin (Alulight, Alporas, Foamtech), aluminum foam sandwiches (AFS), and syntactic metal foams, the tendency to brittle fracture in tension and fatigue was shown. By means of scanning electron microscopy of fracture surfaces and cross-sections, this tendency was attributed to a brittle behavior of the cell strut material that is caused by casting porosity and large Si precipitates in the Al-Si eutectic of aluminum cast alloy. The general objective of the work is the derivation of robust and reliable mechanical testing procedures and an improved understanding of the damage mechanisms of cellular metals under monotonic and cyclic loading conditions. The results have served as the basis for the definition of a draft standard for tensile testing of cellular metals (German Institute for Standardization DIN 50099) which is outlined in the present paper.

: http://publica.fraunhofer.de/dokumente/N-360523.html