Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Experimental measurement of group velocity dispersion during operation in cladding-pumped large-mode-area Yb-doped fibers

: Baselt, Tobias; Taudt, Christopher; Lasagni, Andrés-Fabián; Hartmann, Peter

Poster urn:nbn:de:0011-n-3566146 (13 MByte PDF)
MD5 Fingerprint: 6307ffd078c301db5264ab6cd5fce6ad
Erstellt am: 12.11.2015

Volltext urn:nbn:de:0011-n-356614-19 (687 KByte PDF)
MD5 Fingerprint: 890fb09a5a4f9037c1b99c9ad0c49052
Copyright Society of Photo-Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.
Erstellt am: 12.11.2015

Lehmann, P. ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
Optical Measurement Systems for Industrial Inspection IX : 22-25 June 2015, Munich, Germany
Bellingham, WA: SPIE, 2015 (Proceedings of SPIE 9525)
ISBN: 978-1-62841-685-5
Paper 95253Z, 7 S.
Conference "Optical Measurement Systems for Industrial Inspection" <9, 2015, Munich>
Bundesministerium für Bildung und Forschung BMBF
FHprofUnt; 03FH004PX3
Entwicklung und Evaluierung eines industrietauglichen Messplatzes zur Bestimmung der Dispersion in multimodalen Lichtwellenleitern
Konferenzbeitrag, Elektronische Publikation
Fraunhofer IWS ()
time-frequency-domain dispersion measurement; group velocity dispersion during operation; multicore fibers; large effective mode area (LMA) fibers

Ever higher output power of fiber lasers leads to growing requirements on the fibers used. The increasing intensity of light in the fiber core is compensated by enlargement of the area of the doped core. The guiding properties of the optical fiber are significantly affected and must be very accurately defined. This high intensity leads to significant deviations of the guiding properties of the optical fiber during laser operation due to absorption and thermal effects. In particular, information about the change in group-velocity dispersion(GVD) during operation is important for the development of high power fiber laser systems. In an effort to gather such knowledge, this paper presents the results of dispersion characterization measurements using ytterbium-doped large-mode-area double-clad fibers which are cladding pumped at a wavelength of 975 nm. The direct measurement of the GVD in the emission range of the ytterbium-doped fibers (1000 nm to 1150 nm) is shown. GVD characteristics of two different large-mode-area double-clad fibers with defined launching pump laser power level were systematically analyzed. The dispersion parameters for different fiber designs and various doping levels are investigated over a broad spectral range in the emission area of Yb-doped fiber samples for controlled sets of operating parameters. The experiment utilizes a supercontinuum source developed within this laboratory as well as a Mach-Zehnder interferometer with a dual-channel spectral-detection system sensitive to wavelengths from 0.95 mu m to 1.75 mu m. Temporally resolved spectrograms recorded at distinct delay positions enable the detection of interference fringes for the equalization wavelength. By applying a Sellmeier polynomial fit to the wavelength dependent differential group-delay function, the GVD can be derived. The measured Yb-doped large-mode-area fibers show a variation of the doping concentration between 0.7 mass percent to 3 mass percent of ytterbium. The measurement of the Yb-doped large-mode-area fiber with or without optical load on the sample during the measurement was examined.