Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Automatic pose optimization for robotic processes

 
: Schneider, Ulrich; Diaz Posada, Julian Ricardo; Verl, Alexander

:

Parker, Lynne (General Chair) ; Institute of Electrical and Electronics Engineers -IEEE-; IEEE Robotics and Automation Society:
IEEE International Conference on Robotics and Automation, ICRA 2015 : Technologies Enabling New Economic Growth. May 26 - 30, 2015, Seattle, Washington, USA. Proceedings
Piscataway, NJ: IEEE, 2015
ISBN: 978-1-4799-6922-7
ISBN: 978-1-4799-6923-4
S.2054-2059
International Conference on Robotics and Automation (ICRA) <2015, Seattle/Wash.>
European Commission EC
FP7; 258769; COMET
Englisch
Konferenzbeitrag
Fraunhofer IPA ()
machining; robotics; positioning; modeling; Industrieroboter; Positionieren; Positioniergenauigkeit

Abstract
In many robotic processes such as milling and drilling, there are multiple solutions for robot poses, as the rotation around the tool axis remains as a degree of freedom (DoF) in positioning. Yet until now, this DoF causes additional efforts in CAM programming as it requires manual intervention. Instead, this DoF can be used to optimize the robot pose according to different criteria of the robot such as stiffness or avoidance of backlash effects. This paper presents different criteria for optimization of the robot pose in machining and describes the optimization of robot stiffness based on a novel method for its identification, which is in detail described on this paper. Furthermore, the potential of the automatic resolution of the DoF is outlined enabling staff without robot knowledge to define reasonable robot paths.

: http://publica.fraunhofer.de/dokumente/N-347616.html