Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Titanium aluminides for automotive applications processed by electron beam melting

 
: Biamino, S.; Klöden, B.; Weißgärber, T.; Kieback, B.; Ackelid, U.

Chernenkoff, R.A. ; Metal Powder Industries Federation -MPIF-, Princeton/N.J.:
Advances in powder metallurgy & particulate Materials 2014 : Proceedings of the 2014 International Conference on Powder Metallurgy & Particulate Materials sponsored by the Metal Powder Industries Federation, May 18 - 22, Orlando, FL
Princeton: MPIF, 2014
ISBN: 978-0-9853397-6-0
S.96-103
International Conference on Powder Metallurgy & Particulate Materials (PowderMet) <2014, Orlando/Fla.>
Powder Metallurgy World Congress & Exhibition (PM) <2014, Orlando/Fla.>
Englisch
Konferenzbeitrag
Fraunhofer IFAM, Institutsteil Pulvermetallurgie und Verbundwerkstoffe Dresden ()

Abstract
Powders of alloys Ti-48Al-2Cr-2Nb (48-2-2) and Ti-48Al-2Nb-0.7Cr-0.3Si (RNT650) were used to fabricate test samples and turbocharger wheel prototypes, respectively, by electron beam melting. This additive manufacturing technology uses an electron beam to generate parts by selectively melting the powder in a layer-by-layer way based on CAD data. The parts of both alloys were fully densified with only minor percentages of build flaws. For alloy 48-2-2, a loss of Al of about 1.4 wt% is observed, while the levels of impurities are comparable between the powder and the part. Furthermore, the microstructure was investigated after EBM and after EBM + heat treatment for alloy 48-2-2. It is characterized by equiaxed grains after EBM. An additional heat treatment transformed this microstructure into a fully lamellar one showing that the microstructure was homogenized.

: http://publica.fraunhofer.de/dokumente/N-332445.html