Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Next generation printing technologies for fine-line metallization of Si solar cells

Paper presented at 6th World Conference on Photovoltaic Energy Conversion 2014, Kyoto, Japan, 23.11.2014-27.11.2014
 
: Clement, F.; Pospischil, M.; Lorenz, A.; Linse, M.; Erath, D.; Kuchler M.; Klawitter, M.; Spribille, A.; Hoenig, R.; Efinger, R.; Fellmeth, T.; Biro, D.

:
Volltext urn:nbn:de:0011-n-3322823 (127 KByte PDF)
MD5 Fingerprint: cded439036ddea75e5678ff708c319dc
Erstellt am: 27.3.2015


2014, 2 S.
World Conference on Photovoltaic Energy Conversion (WCPEC) <6, 2014, Kyoto>
Englisch
Vortrag, Elektronische Publikation
Fraunhofer ISE ()
PV Produktionstechnologie und Qualitätssicherung; Silicium-Photovoltaik; Kontaktierung und Strukturierung; Pilotherstellung von industrienahen Solarzellen; Silicium-Solarzelle; Metallisierung; Drucktechnologie

Abstract
Next generation printing technologies for solar cell front side metallization have to allow for narrower finger grid lines with higher aspect ratios. Moreover, significant silver paste reductions have to be achieved. In this work the newly developed dispensing technology as well as stencil printing are presented and compared with conventional screen printing. The results show that the dispensing technology is the most promising approach to improve the Ag paste utilization by optimizing the finger geometry without the need of paste modifications. Homogenous finger grid lines with widths down to ~30µm are demonstrated. Furthermore dispensing leads to solar cell efficiency increases of 2% relative in comparison to state-of-the-art single step screen printing.

: http://publica.fraunhofer.de/dokumente/N-332282.html