Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Design of freeform optics for an ophthalmological application

 
: Sieber, Ingo; Yi, Allen; Li, Likai; Beckert, Erik; Steinkopf, Ralf; Gengenbach, Ulrich K.

:

Wyrowski, F. ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
Optical Modelling and Design III : 15-17 April 2014, Brussels, Belgium
Bellingham, WA: SPIE, 2014 (Proceedings of SPIE 9131)
ISBN: 978-1-6284-1079-2
Paper 913108
Conference "Optical Modelling and Design" <3, 2014, Brussels>
Englisch
Konferenzbeitrag
Fraunhofer IOF ()
design for manufacturability; freeform optics; optical modelling and simulation; polymer optics

Abstract
Optical freeform surfaces are gaining importance in different optical applications. A huge demand arises e.g. in the fields of automotive and medical engineering. Innovative systems often need high-quality and high-volume optics. Injection moulded polymer optics represents a cost-efficient solution. However, it has to be ensured that the tight requirements with respect to the system s performance are met by the replicated freeform optics. To reach this goal, it is not sufficient to only characterise the manufactured optics by peak-to-valley or rms data describing a deviation from the nominal surface. Instead, optical performance of the manufactured freeform optics has to be analysed and compared with the performance of the nominal surface. This can be done by integrating the measured surface data of the manufactured freeform optics into the optical simulation model. The feedback of the measured surface data into the model allows for a simulation of the optical performance of the optical subsystem containing the real freeform optics manufactured. Hence, conclusions can be drawn as to whether the specifications with respect to e.g. imaging quality are met by the real manufactured optics. This approach will be presented using an Alvarez-Humphrey optics as an example of a tuneable optics of an ophthalmological application. The focus of this article will be on design for manufacturing the freeform optics, the integration of the measured surface data into the optical simulation model, simulation of the optical performance, and analysis in comparison to the nominal surface.

: http://publica.fraunhofer.de/dokumente/N-297786.html