Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Simulation of heat transfer on periodic microstructured surfaces for evaporation cooling

Presentation held at COMSOL 2013, October 23 - 25, 2013, Rotterdam
Simulation des Wärmetransportes bei der Siedekühlung mit mikrostrukturierten Oberflächen
 
: Hackert-Oschätzchen, Matthias; Paul, Raphael; Penzel, Michael; Zinecker, Mike; Schubert, Andreas

:
Preprint urn:nbn:de:0011-n-2668316 (635 KByte PDF)
MD5 Fingerprint: 45b2dd4d13936618975fcb0ef21ff43e
Erstellt am: 27.11.2013


2013, 5 S.
COMSOL Conference <2013, Rotterdam>
Englisch
Vortrag, Elektronische Publikation
Fraunhofer IWU ()
evaporative cooling; microstructured surface; non-isothermal flow; Siedekühlung; Mikrostrukturierte Oberflächen; nicht-isothermale Strömung

Abstract
The growing power density of electronic devices requires the development of new cooling methods and systems by which large heat fluxes can be dissipated. In this respect, evaporative cooling is an innovative and promising method [1, 2]. In addition to convective heat dissipation, the boiling fluid absorbs vaporization heat. Beside the operation by natural circulation, in which the fluid flow arises by natural convection, there is the possibility to apply a forced circulation. In this case the fluid flow is created by applying an external pressure difference what allows high flow velocities. Thus resulting vapor bubbles are removed quickly from the cooler surface and a high convective cooling performance can be achieved. In order to increase heat transfer microstructures can be machined into the cooler surface. That increases the heat transfer coefficient by enlarging the cooler surface and manipulates the fluid flow as well as the boiling process [1]. In this study the influence of cylindrical micro-structures with an aspect ratio of 0.5 on the heat transfer has been investigated analyzing conductive and convective components. Using COMSOL MultiphysicsTM a 3D model applying the non-isothermal flow interface was created. The model exploits the symmetry of the steady flow field. Fluid with defined initial temperature and velocity flows over a micro-structured cooler segment where the undersurface is heated to a defined temperature. The investigated micro-structure arrangements are shown in Figure 1. As an example for the results, Figure 2 shows heat flux streamlines through one of the investigated microstructure arrangements. An evaluation was carried out regarding the formed fluid flow and heat flow fields. In addition the results of a Richardson-Extrapolation of the achieved heat fluxes respectively heat transfer coefficients are analyzed.

: http://publica.fraunhofer.de/dokumente/N-266831.html