Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Challenges of the multi wire sawing process for thin wafers below 120 µm thickness

 
: Weber, B.

:
Volltext urn:nbn:de:0011-n-2366093 (1.8 MByte PDF)
MD5 Fingerprint: 3f18b84cff99b266d0387849fe7f8a54
Erstellt am: 12.4.2013


Nowak, S. ; European Commission:
27th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2012. DVD-ROM : Proceedings of the international conference held in Frankfurt, Germany, 24 - 28 September 2012
München: WIP-Renewable Energies, 2012
ISBN: 3-936338-28-0
S.1060-1063
European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <27, 2012, Frankfurt>
Englisch
Konferenzbeitrag, Elektronische Publikation
Fraunhofer ISE ()
Materialien - Solarzellen und Technologie; Silicium-Photovoltaik; Silicium-Photovoltaik; Feedstock; Kristallisation und Wafering; Feedstock; Kristallisation und Wafering

Abstract
The photovoltaic sector is still dominated by silicon solar cells based on wafers cut by multi wire saws with slurry based on silicon carbide. The thinner the wafer and the wire get, the more important are the influence of the sawing processes in neighbouring sawing channels on wafer geometry and the wire wear which indicates the safety margin against rupture. The purpose of this work is to investigate the limitations of wire sawing of wafers below 120 ?m thickness by analysis of local thickness distribution of the wafers and the wire wear during the sawing process. The results of detailed wafer thickness measurements show a significant influence of the sawing processes in neighbouring channels on wafer geometry. Tensile tests of new and used wires show that the wire breakage force declines with reduced wire diameter. However, stress-strain analysis shows that the abrasively reduced wire has a similar slope as new wire of same diameter. The thickness measurements show that the abrasion rate of the wires and the wire loading are dependent on each other.

: http://publica.fraunhofer.de/dokumente/N-236609.html