Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Integration of OLEDs in textiles

 
: Janietz, S.

:

Vincenzini, P.:
Smart and interactive textiles : Selected, peer reviewed papers from the symposium D "Smart and interactive textiles" of CIMTEC 2012 - 4th international conference "Smart materials, structures and systems", held in Montecatini Terme, Italy, June 10-14, 2012
Dürnten: Trans Tech Publications, 2013 (Advances in science and technology 80)
ISBN: 978-3-908158-66-0
ISBN: 3-908158-66-4
S.14-21
Symposium D "Smart and Interactive Textiles" <2012, Montecatini Terme>
International Conference on Smart Materials, Structures and Systems (CIMTEC) <4, 2012, Montecatini Terme>
Englisch
Konferenzbeitrag
Fraunhofer IAP ()

Abstract
In place of silicon, which is normally used in microelectronics, organic materials offer the opportunity to produce devices on large area, low-cost and plastic planar substrates. These materials are attracting increased attention also in the field of electronic-textiles (e-textiles) because they show an interesting combination of electronic and mechanical properties that can be favourably exploited in smart textiles. A key step for the integration of mass production of e-textiles is to combine electronic production with textile manufactures. In the last years, progress has been achieved in the development of fibers and their processing for application in e-textiles. The application ranged from fabric integrated light sources to low cost solid state lighting for protection and security. Here research results are presented regarding the integration of encapsulated glass OLEDs and additionally OLEDs fabricated on flexible high barrier substrates which were integrated into textiles. On the other hand, the first results concerning the realization of an OLED on cylindrical surfaces based on solution processed technologies which is a first step in the direction of low cost processing will be discussed. A simple, inverted planar construction prepared from solution was realized. This preliminary work was the precondition for the development of a fiber based OLED. In addition, OLEDs that were prepared using glass fibers as substrates and solution processed active and hole-transport layers will be shown.

: http://publica.fraunhofer.de/dokumente/N-233390.html