Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Influence of Contaminations and Cleaning Sequences on Alkaline Texturisation

: Sonner, C.; Oltersdorf, A.; Zimmer, M.; Rentsch, J.

Volltext urn:nbn:de:0011-n-2210514 (283 KByte PDF)
MD5 Fingerprint: f1cef44ee4c13d24d21f650f64bbbf43
Erstellt am: 7.12.2012

European Commission:
26th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC. Proceedings : 5th to 9th September 2011 at the CCH - Congress Centre and International Fair Hamburg in Germany
München: WIP-Renewable Energies, 2011
ISBN: 3-936338-27-2
European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <26, 2011, Hamburg>
Konferenzbeitrag, Elektronische Publikation
Fraunhofer ISE ()
PV Produktionstechnologie und Qualitätssicherung; Silicium-Photovoltaik; Produktionsanlagen und Prozessentwicklung

In this paper, the influences of contaminations and cleaning sequences on the alkaline texturisation were investigated. The silicon surface was specifically exposed to organic and metallic contaminations to study their influences on the alkaline texturisation process. Contaminations can occur as particles, films or gases, which can be deposited on the surface e.g. by the multi-wire slurry sawing, wafer storage or transport. Possible contaminations are organic compounds like slurry, glue, synthetics or etch resist and metals. The different influences on the alkaline texturisation and their were investigated. The results are quantified by confocal microscopy images, weighted reflection, surface roughness and surface enlargement. Therefore, it could be shown that the inorganic contamination has only a samll influence on the pyramid density, but no influence on macroscopic parameters, while organic contamination like glue residuals or etch resist showed critical problems and can inhibit the alkaline texturisation process.