Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

The effect of tack welding on numerically calculated welding-induced distortion

 
: Heinze, C.; Schwenk, C.; Rethmeier, M.

:

Journal of materials processing technology 212 (2012), Nr.1, S.308-314
ISSN: 0924-0136
Englisch
Zeitschriftenaufsatz
Fraunhofer IPK ()
gas metal arc welding; tack welding; welding simulation; welding-induced distortion

Abstract
A single-layer pulsed gas metal arc weld of structural steel S355J2+N with a thickness of 5 mm is experimentally and numerically investigated. Two tack welds are considered in the numerical simulation into two different ways. First, the tack welds are represented by elements belonging to the initial material. This implies that the "tack weld material" was not exposed to any thermal load or phase transformation before actual welding was performed. The weld seam is shortened and there is an influence on the stiffness of the whole structure affecting the calculation result. Secondly, the tack welds were simulated as conducted in the experimental welding procedure. The cases considering tack welding are compared to a simulation neglecting tack welding and to the experimental results. The influence of tack welds on the calculated welding-induced distortion is clarified and a contribution to an improved simulation-based prediction of welding-induced distortion is possible by modeling tack welding according to the realistic fabrication procedure.

: http://publica.fraunhofer.de/dokumente/N-190043.html