Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Verzahnungswalzen

Vortrag gehalten auf dem Abschlusskolloquium SPP 1180 "Prognose und Beeinflussung von Wechselwirkungen zwischen Prozessen und Strukturen", 28.06.2011, Hannover
 
: Neugebauer, Reimund; Hellfritzsch, U.; Lahl, M.; Schiller, S.; Milbrandt, M.; Druwe, T.

:
Präsentation urn:nbn:de:0011-n-1745994 (4.0 MByte PDF)
MD5 Fingerprint: ace077ab1d2cb60edf3c93d71d5d8d19
Erstellt am: 27.7.2011


2011, 21 Folien
Abschlusskolloquium "Prognose und Beeinflussung von Wechselwirkungen zwischen Prozessen und Strukturen" <2011, Hannover>
Deutsch
Vortrag, Elektronische Publikation
Fraunhofer IWU ()
cold forming; cold rolling; cross rolling; FEM simulation; gear quality; gear rolling; high gearing; incremental forming; laser tracker system; machine behavior; machine concept; material behavior; material flow; meshing

Abstract
The rolling process is an efficient alternative to currently exclusively applied cut-ting processes for the production of high gears particularly regarding economic and ecological aspects. The manufacture of involute gear profiles by forming, specifically by rolling has several advantages in comparison to cutting methods, e.g. significantly shorter process times, no material loss and subsequently no chip disposal, strength increase in the forming zone and a high surface quality. Due to these characteristics gear forming will continue to gain relevance in future gear manufacturing. The Chapter presents the efforts being made at the Fraunhofer IWU Chemnitz to reach an advancement of the high gear rolling process by improvement of the gearing qualities. It presents the investigation and analysis of the interaction between tools, machine and forming process in gear rolling. The results of measurements on displacements of work piece, tools and clamping device during the rolling process of a high gearing are displayed. The setup and results of accompanying simulation of the forming process are given as well.

: http://publica.fraunhofer.de/dokumente/N-174599.html