Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Principles of variable amplitude fatigue design and testing

 
: Sonsino, C.M.

McKeighan, P.C.:
Fatigue testing and analysis under variable amplitude loading conditions
West Conshohocken, Pa.: ASTM, 2005 (ASTM STP 1439)
ISBN: 0-8031-3479-7
S.3-23
Symposium on Fatigue Testing and Analysis under Variable Amplitude Loading Conditions <2002, Tours>
Englisch
Konferenzbeitrag
Fraunhofer LBF ()

Abstract
The proper consideration of variable amplitude loading by utilizing service spectra and appropriate Gassner-lines is essential for the design of light-weight components and structures by allowing loads in significant excess of the Woehler-line (S-N curve). This permits higher stresses than under constant amplitude loading and renders reduced component dimensions. Reliable reconstitution and simulation methods for service load-time histories require not only the rainflow matrices, but also information about the order of the cycles described by Markovian matrices, the power spectral density and, for multiaxial applications, the cross-correlations between the particular load directions as well as the phase relations. A major problem in numerical fatigue life assessment is still the fatigue life calculations for spectrum loading, because of the scattering of the real damage sum D over a wide range, which is not entirely understood. These findings demonstrate the need for ex perimental spectrum tests, which are indispensable for ensuring the safety of parts. With regard to safety and liability requirements, the failure probability resulting from the probability of occurrence of the spectrum, from the scattering of the fatigue strength and from the failure criterion (technical crack or propagation), must be taken into account.

: http://publica.fraunhofer.de/dokumente/N-173259.html