Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Inkjet structured EWT silicon solar cells with evaporated aluminum metallization and laser-fired contacts

 
: Fallisch, A.; Stüwe, D.; Neubauer, R.; Wagenmann, D.; Keding, R.; Nekarda, J.; Preu, R.; Biro, D.

:
Volltext urn:nbn:de:0011-n-1595106 (409 KByte PDF)
MD5 Fingerprint: c4615670ac632b674d2618a7ce53b05b
Erstellt am: 4.8.2012


Institute of Electrical and Electronics Engineers -IEEE-; IEEE Electron Devices Society:
35th IEEE Photovoltaic Specialists Conference, PVSC 2010. Vol.5 : Honolulu, Hawaii, USA, 20 - 25 June 2010
Piscataway/NJ: IEEE, 2010
ISBN: 978-1-4244-5890-5
ISBN: 978-1-4244-5891-2
ISBN: 978-1-4244-5892-9
S.3125-3130
Photovoltaic Specialists Conference (PVSC) <35, 2010, Honolulu/Hawaii>
Englisch
Konferenzbeitrag, Elektronische Publikation
Fraunhofer ISE ()
PV Produktionstechnologie und Qualitätssicherung; Silicium-Photovoltaik; Solarthermie; Herstellung und Analyse von hocheffizienten Solarzellen

Abstract
This work focuses on manufacturing inkjet structured Emitter Wrap-Through (EWT) silicon solar cells with a side selective emitter and an evaporated metallization. Inkjet structuring is a suitable technique for the formation of interdigitated structures used in back contacted silicon solar cells because it allows small feature sizes and has high alignment accuracy. Therefore all structuring steps in this EWT solar cell process are done with the help of inkjet masking. This includes the structuring of a silicon oxide passivation layer and the evaporated aluminum metallization. For all masking processes an acid-resistant inkjet hotmelt ink is used. An evaporated thick aluminum layer and laser-fired contacts (LFC) to contact the bulk region are introduced. Cell efficiencies above 15% prior to a forming gas anneal are reached. The best cell reaches an efficiency of 15.7% after a short annealing step on a hotplate.

: http://publica.fraunhofer.de/dokumente/N-159510.html