Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Characterisation of local Al-BSF formation for PERC solar cell structures

: Grasso, F.S.; Gautero, L.; Rentsch, J.; Preu, R.; Lanzafame, R.

Volltext urn:nbn:de:0011-n-1563799 (350 KByte PDF)
MD5 Fingerprint: 281ae906e9df3a01c7d1f66109a1adad
Erstellt am: 3.8.2012

European Commission:
25th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2010. Proceedings : 5th World Conference on Photovoltaic Energy Conversion, 6-10 , September 2010, Valencia, Spain
München: WIP-Renewable Energies, 2010
ISBN: 3-936338-26-4
European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <25, 2010, Valencia>
World Conference on Photovoltaic Energy Conversion <5, 2010, Valencia>
Konferenzbeitrag, Elektronische Publikation
Fraunhofer ISE ()
PV Produktionstechnologie und Qualitätssicherung; Silicium-Photovoltaik; Charakterisierung von Prozess- und Silicium-Materialien; Pilotherstellung von industrienahen Solarzellen; Messtechnik und Produktionskontrolle; Industrielle und neuartige Solarzellenstrukturen; Produktionsanlagen und Prozessentwicklung; Charakterisierung; Qualitätssicherung und Messtechnikentwicklung: Material; Zellen und Module

Silicon wafers still represent a significant part of the costs of current solar modules. Passivated Emitter and Rear Cells (PERC) are a very promising technology in comparison to conventional cells. In this study PERC point like contacts at the back surface of p-type CZ silicon wafers realized with an industrial feasible technique are investigated. Since the formation of the Back Surface Field (BSF) is a critical step for the performance of solar cells, cross sections of the local contacts have been analyzed at the Scanning Electron Microscope (SEM). In order to investigate how to control the formation of the BSF, two different pastes consisting of pure aluminium particles were screen printed and different thermal profiles were applied. As a function of the width of the contacts, three major profiles can be observed: triangular, trapezoidal and with rounded edges at the sides. An explanation of the origin of these profiles is offered here. Concerning the results, one of the pastes allows achieving thicker and more homogenous BSF layers for widths of the contacts in the range of 120 to 190 Bm. This investigation shows that the present optical characterization is helpful to characterize the thickness of the BSF and, hence, its synergic use with electrical investigations can bring about enhancements in the performance of the cells.