Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Einfluss der Aufschlusstemperatur auf die morphologischen Eigenschaften von TMP aus Kiefernholz

Effect of pulping temperature on the morphological properties of TMP made from pine wood
 
: Roffael, E.; Bär, G.; Behn, C.; Dix, B.

:

European journal of wood and wood products 67 (2009), Nr.1, S.119-120
ISSN: 0018-3768
ISSN: 1436-736X
Deutsch
Zeitschriftenaufsatz
Fraunhofer WKI ()

Abstract
Chips from pine wood were subjected to thermomechanical pulping (TMP) at 140 and 180 degrees C for 5 minutes, whereas the cooked chips were defibrated using a single disk pressurized refiner at the same temperatures (140 and 180 degrees C). The fibres were tested for some of their morphological properties including fibre length, fibre width, cell-wall thickness. Moreover, the fine fibre fraction (zero fibres) and the content of splinters were also estimated. The results reveal, that increasing the temperature during thermomechanical pulping decreases the fibre length, the cell width and the fibre wall thickness. It also increases the amount of fine fibres and increases the curl factor.

: http://publica.fraunhofer.de/dokumente/N-101773.html