Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Development and application of TiC-Ni-based plasma sprayed coatings

Entwicklung und Anwendung plasmagespritzter Schichten auf TiC-Ni-Basis
 

Lugscheider, E. ; Deutscher Verband für Schweißen und Verwandte Verfahren e.V. -DVS-:
United Thermal Spray Conference 1999. Vorträge und Posterbeiträge
Düsseldorf: Verlag für Schweißen und Verwandte Verfahren, 1999
ISBN: 3-87155-653-X
S.128-133
United Thermal Spray Conference (UTSC) <1999, Düsseldorf>
Englisch
Konferenzbeitrag
Fraunhofer IKTS ()
thermal spray; plasma spray; APS; cermets; TiC-based coating

Abstract
This paper describes results of fundamental studies of APS for different alloying steps in the production of TiC-based coatings from agglomerated and sintered powders and results of application of APS coatings on piston rings. APS is, besides DGS and HVOF, a suitable technology for producing such coatings. The introduction of nitrogen into the hard phase does not result in an increase of dry abrasion wear resistance for APS coatings, but has a significant effect on coating wear when used as a piston ring coating in a passenger car engine. If spraying is done by APS, it is economic advantage that Ar/H2 plasma gases can be used for reaching optimum results instead of Ar/He, which must be used for WC-Co or Cr3C2-NiCr. With respect to dry abrasive wear, TiC-based coatings are fully competitive with commercially introduced systems and can be compositionally tailored for use in simultaneously abrasive and corrosive media.

: http://publica.fraunhofer.de/dokumente/B-60253.html