Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Schwingfestigkeit von Verschraubungen aus Sinterwerkstoffen

Fatigue behaviour of screwed sintered materials
 
: Lipp, K.
: Fraunhofer-Institut für Betriebsfestigkeit -LBF-, Darmstadt

Darmstadt, 1991, 15 pp. : Abb.,Tab.,Lit.
Technische Mitteilungen - Fraunhofer-Institut für Betriebsfestigkeit Darmstadt, 101
ISSN: 0173-3656
German
Book
Fraunhofer LBF ()
Bauteil; bolted joint; Dauerfestigkeit; density; Dichte; endurance limit; fatigue life improving measure; Festigkeit; Fügetechnik; heat treatment; joining technique; Konstruktion; lebensdauersteigernde Maßnahme; material property; powder metallurgy; Pulvermetallurgie; Schraubverbindung; sintered material; sintered steel; Sinterwerkstoff; static pull-out behaviour; statisches Auszugverhalten; Stinterstahl; strength; structural component; structure; Wärmebehandlung; Werkstoffeigenschaft

Abstract
For the design of screwed components, information about static pulI-out and fatigue behaviour are required. The appropriate data and manufacturing methods for various PMsteels and PM-aluminium alloys were determined and compared with existing results for cast and wrought materials. The pull-out behaviour is defined by the critical screwing depth. The screwing depth necessary for adequate fatigue behaviour is defined by using metallography. In comparison to cast iron and wrought steels the fatigue strength of PM- materials is higher because of a better stress distribution in the thread due to the higher resilience related to the porosity.

: http://publica.fraunhofer.de/documents/PX-56270.html