Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Anwendung eines Hochleistungs-Diodenlasers zum Biegen von Blechen

 

Technologie-Workshop Fertigungstechnologien 1997 : 19. September 1997, Innovationsmesse Leipzig
Leipzig, 1997
6 pp. : Ill., Lit.
Technologie-Workshop Fertigungstechnologien <1997, Leipzig>
Innovationsmesse <1997, Leipzig>
German
Conference Paper
Fraunhofer IWU ()
high-power diode laser; Hochleistungs-Diodenlaser; laser; laser application; laser bending; laseranwendung; laserbiegen

Abstract
Application of a high-power diode laser for laser bending. This paper gives an account of the first application of a high-power diode laser system for laser bending of sheet metals. The applied diode laser has an power output of 100 Watt at a wavelength of 810 nm. Sheet metals of AlMg3, St 14 and stainless steel have been investigated. The results show that it is possible to bend sheets with a thickness of up to 2 mm. The paper shows the correlation between the obtained bend angle and the investigated parameters like path feed rate, number of irradiations, sheet material and sheet thickness. An estimate of the range of application of the diode laser for laser bending has been derived from the determined results.

: http://publica.fraunhofer.de/documents/PX-4201.html