Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Robust design of gas and liquid micropumps

 
: Richter, M.; Linnemann, R.; Woias, P.

:

Sensors and Actuators. A 68 (1998), No.1/3, pp.480-486 : Lit.
ISSN: 0924-4247
Eurosensors <11, 1997, Warschau>
English
Conference Paper
Fraunhofer IFT; 2000 dem IZM eingegliedert
diaphragms; flow control; micropump; surface energy; valve

Abstract
Due to the small stroke of microactuators, the compression ratio of micropumps is frequently small. This means that serious constraints exist for most micropump designs concerning self-priming capability and bubble tolerance. To access this problem in this study, criteria for the minimum compression ratio of a micropump are derived depending on the medium transported. It turns out that under real operation and handling conditions (outgassing, incomplete priming) design rules applicable for gas pumps also have to be used for liquid pumps. Next, if the liquid pump is to be able to prime itself, a critical pressure has to be achieved, which leads to a further increase of the necessary compression ratio. To determine this critical pressure, the surface and interfacial energies of the liquid have to be taken into account.

: http://publica.fraunhofer.de/documents/PX-32172.html