Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Microstructure, mechanical properties and wear of Si3N4/TiN composites

 
: Herrmann, M.; Beger, A.; Schubert, C.; Hermel, W.; Meißner, E.; Ziegler, G.

Deutsche Gesellschaft für Materialkunde e.V. -DGM-, Oberursel:
PTM '93. Materials by Powder Technology. Proceedings
Oberursel: DGM-Informationsgesellschaft, 1993
ISBN: 3-88355-191-0
pp.779-784
International Conference on Materials by Powder Technology <1993, Dresden>
English
Conference Paper
Fraunhofer IKTS ()
Eigenschaft; Komposit; particle-reinforced composite; Partikelverstärkung; property; Si3N4; Siliciumnitrid; silicon nitride; sintering; Sintern; TiN; titanium nitride; Titannitrid; Verschleiß; wear

Abstract
A number of particle-reinforced composites in the system Si3N4 /TiN were developed. Important results of strength-, KIc- and wear-measurements are: (1.) The strength and the KIc depend on the amount and grain size of the TiN-particles. (2.) For continuous turning of cast iron the TiN-containing materials exhibit under the used conditions a lower wear resistance than monolithic Si3N4-materials. (3.) Under the conditions of discontinuous turning of steel (depth of cut 1 mm) the wear resistance of the composites is significantly higher than for monolithic Si3N4.

: http://publica.fraunhofer.de/documents/PX-23995.html