Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Measurement of mechanical properties of thin solid films -hardness, elasticity, stress-

 
: Taube, K.

Gissler, W.; Jehn, H.A. ; European Commission, Directorate-General for Telecommunications, Information Industries and Innovation:
Advanced Techniques for Surface Engineering
Dordrecht: Kluwer Academic Publishers Group, 1992 (EUR 14658)
ISBN: 0-7923-2006-9
pp.275-294
Eurocourse on Advanced Techniques for Surface Engineering <1992, Ispra>
English
Conference Paper
Fraunhofer IST ()
elasticity; hardness; mechanical property; nanometer indenter; stress; substrate curvature; thin films; x-ray diffraction; Young's modulus

Abstract
This article gives an overview of current techniques to determine hardness, Young's modulus and stress state of a thin solid film on a substrate. The former two are measured with an instrument sometimes referred to as a nanometer indenter. It is capable of detecting continuously the indentation depth of a diamond tip in dependence of load on the indenter with nanometer precision. From loading-unloading cycles the mechanical parameters hardness and Youngs's modulus are calculated. The stress state of thin films can be obtained by measuring the curvature of a bent substrate with the stressed film fixed to it or by x-ray techniques to determine the spacing between strained crystal planes. The mathematical theory, assumptions and limitations of these techniques are discussed and two examples of the information obtained from these measurements are presented.

: http://publica.fraunhofer.de/documents/PX-23065.html