Options
1989
Conference Paper
Titel
Lasermaterialbearbeitung von Kunststoffen
Alternative
Material processing of plastics with laser
Abstract
Radiation sources in the infrared region, especially Nd:YAG-Lasers (lambda = 1.06 mym) and CO2-lasers (lambda = 10,6 mym), are mainly used in material processing (welding, cutting, drilling or refining) (1). Excimer lasers with their UV-radiation (lambda = 190 nm-400nm) are used in chemical processes, marking, drilling and ablation (2). However, the advantages of the processing of plastics with laser radiation are not used extensively (e.g. cutting and marking) (3). Absorption properties of the material as well as the change of the material quality define the treatment with laser radiation. Because of the - in general - insignificant thermal conductivity, the energy deposition in the material is limited to small volumes. Therefore the optical penetration depth of the laser radiation into the material has an important influence on the selection of processing techniques.