Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Durabilite de l'adhesion entre metaux et polymers

 
: Brockmann, W.

Surfaces Materiaux Technologie (1988), No.243, pp.171-181
ISSN: 0223-4335
French
Journal Article
Fraunhofer IFAM ()
Adhäsion; Festigkeit; Klebtechnik; Langzeitbeständigkeit; Oberflächenvorbehandlung

Abstract
Sufficient adhesion between metals and polymers is only to obtain by chemical bonds in the surface layers between metal and polymer. But also in this case remains mostly sensitivity of the boundary zone against humidity diffusing through the polymer and primary corrosion starting at unprotected parts of the metal. Three deterioration mechanisms are to be observed. The first is a weakening effect in a polymer layer near the metal oxides whose structure differs from the bulk polymer and is influenced by the chemical and physical properties of the surface. This weakening mechanism mostly is reversible. The second mechanism is a slow changing of the oxides by hydration and a diffusing process of parts of the oxides into the polymer without creation of pores. This process is irreversible and influenced by the state of the surface and the chemical properties of the polymer. The third mechanism is a fast deterioration of the oxides by primary corrosion starting at unprotected edges of the met al and sometimes within the compound. In this case the oxygen concentration plays an important role besides the stability of the oxides and the chemical properties of the polymer. On hand of knowledge about these deterioration mechanisms different ways of systematical optimization will be discussed.

: http://publica.fraunhofer.de/documents/PX-10292.html