Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Influence of CO2 in the Ar process-gas on the heat-conduction mode laser beam welding process with Nd:YAG and diode lasers

 
: Zäh, M.F.; Daub, R.; Mahrle, A.; Beyer, E.

Ostendorf, A. ; Wissenschaftliche Gesellschaft Lasertechnik -WLT-:
Lasers in Manufacturing 2009 : Proceedings of the Fifth International WLT-Conference Lasers in Manufacturing, LiM 2009, Munich, 15 - 18 June 2009
Stuttgart: AT-Fachverlag, 2009
ISBN: 978-3-00-027994-2
pp.45-53
International Conference on Lasers in Manufacturing (LiM) <5, 2009, Munich>
English
Conference Paper
Fraunhofer IWS ()
marangoni effect; surface tension; dissociation of CO2; absorption coefficient; flow regime

Abstract
Ar-CO2 mixtures are used as process-gases to optimize welding results. However, the mode of action of the gas mixture is not yet well-understood and practical applications of active gas components strongly depend on empirical experiences. This work identifies the effects of Ar-CO2 mixtures on the welding process. The influence of the variation of CO2 in the Ar process-gas on the melt-pool temperature, the alloy, the seam geometry and the absorption-coefficient is experimentally analysed. A Nd:YAG and a diode laser system have been used for the experiments to determine the dependence of the process-gas / melt-pool interaction on the laser wavelength and the beam profile. Two significant effects have been observed. First of all a higher rate of CO2 can bring more energy into the welding se am. Secondly the cross section profile can be altered. A simulation model is presented which explains some details of the mode of action and can support the choice of adapted Ar-CO2 mixtures for laser applications.

: http://publica.fraunhofer.de/documents/N-96242.html