Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Optimierung von Dünnschichtsystemen

 
: Wielage, B.; Wank, A.; Rupprecht, C.; Schmidt, G.; Stark, S.

:

Krenkel, W. ; Deutsche Gesellschaft für Materialkunde e.V. -DGM-, Oberursel; Univ. Bayreuth:
Verbundwerkstoffe. 17. Symposium Verbundwerkstoffe und Werkstoffverbunde 2009 : 01.-03. April 2009, Bayreuth
Weinheim: Wiley-VCH, 2009
ISBN: 978-3-527-32615-0
pp.555-562
Symposium Verbundwerkstoffe und Werkstoffverbunde <17, 2009, Bayreuth>
German
Conference Paper
Fraunhofer IWU ()
Verschleißschutz; dünne Schicht; Umformen; FEM; Simulation

Abstract
For lightweight construction the use of high-strength aluminium alloys plays an increasing role. Hence, in forming processes tools are subject to severe stress. Especially abrasive wear and adhesive properties require the application of lubricants and separators. Due to environmental compatibility and enhanced energy efficiency a minimum of additives is wanted. For this reason the tribological system between tool and workpiece has to be influenced by appropriate surface treatment or coating techniques. For design of forming tools, surface properties and the resulting loading conditions have to be adapted. Appropriate coatings are selected and guidelines for the design of the forming tools are worked out by using numerical simulations.

: http://publica.fraunhofer.de/documents/N-94003.html