Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Investigation of tool geometry, coating and coolant in micro milling of single crystal Nickel-based superalloy Rene N5

 
: Klocke, F.; Quito, F.; Arntz, K.; Souza, A.; Ader, C.

Byrne, G. ; International Academy for Production Engineering -CIRP-, Paris; University College Dublin:
3rd International Conference High Performance Cutting, HPC. CD-ROM : Dublin, Ireland, June 12 - 13th, 2008
Dublin: University College Dublin, School of Electrical, Electronic & Mechanical Engineering, 2008
ISBN: 978-1-905254-32-3
13 pp.
International Conference High Performance Cutting (HPC) <3, 2008, Dublin>
English
Conference Paper
Fraunhofer IPT ()
Nickelsuperlegierung; Mikrofertigung; Fräsen; Fräser; Werkzeuggeometrie; Werkstoff (beschichtet); Kühlschmierstoff; Werkzeugverschleiß; Einflussgröße; Oberflächeneigenschaft; Verschleißprüfung; Versuchsergebnis

Abstract
Single crystal (SX) nickel based superalloys have particular high temperature mechanical properties, oxidation and corrosion resistance. Therefore, these alloys are predestined for high temperature applications like high pressure turbine blades (HPT) of aero or industrial gas engines. This paper presents the viability of micro milling Rene N5. The influence of tool geometry, coating and coolant on the surface quality and tool wear was investigated. One result of the analysis was that a coated tool with a minimum quantity of lubrication (MQL) performed better in comparison with uncoated tools and emulsion coolant. The data obtained can be used to rank the coatings and coolants studied and in some cases predict the relative lifetime of a coated tool.

: http://publica.fraunhofer.de/documents/N-89645.html