Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

10 W high-efficiency high-brightness tapered diode lasers at 976 nm

Hochbrillianter 10 Watt Trapezlaser bei 976 nm
 
: Ostendorf, R.; Kaufel, G.; Moritz, R.; Mikulla, M.; Ambacher, O.; Kelemen, M.; Gilly, J.

:

Zediker, M.S. ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
High-power diode laser technology and applications VI : 21 - 23 January 2008, San Jose, California, USA
Bellingham, WA: SPIE, 2008 (SPIE Proceedings Series 6876)
ISBN: 978-0-8194-7051-5
ISSN: 0277-786X
Paper 68760H
Conference "High-Power Diode Laser Technology and Applications" <6, 2008, San Jose/Calif.>
English
Conference Paper
Fraunhofer IAF ()
high brightness; hohe Brillianz; beam quality; high power; hohe Leistung; diode laser; Diodenlaser; tapered laser; Trapezlaser; AlGaAs-InGaAs; Halbleiterlaser

Abstract
Tapered diode lasers combine high output power and a beam quality near to the diffraction limit resulting in very high brightness. Therefore, they are finding use in a wide range of applications today, such as pumping of rare-earth-doped fibre amplifiers, tunable frequency doubling of diode lasers for blue-green outputs, and non linear spectroscopy. Due to increasing brightness and lifetime tapered lasers even become attractive for material processing and for telecom applications like pumping of Er-doped fiber amplifiers or raman amplifiers.
In order to further enhance the brightness of tapered diode lasers the output power has to be increased while simultaneously the beam quality has to be kept near the diffraction limit. For this purpose we have grown low modal gain, single quantum well InGaAs/AlGaAs devices emitting at 976 nm by molecular beam epitaxy. The lateral design of the investigated laser diodes consist of a tapered section and a ridge-waveguide section. Since it has been shown by previous simulations and experiments that longer tapered sections allow higher output power with unchanged beam quality, we use tapered section lengths of 2000 µm, 3000 µm and 4000 µm. The beam quality parameter M(exp 2) and output powers as well as the nearfields of the different structures were carefully investigated. For longer devices we reach an optical output power of more than 10 W per single emitter in continuous wave mode (cw) without any distinct thermal rollover.

: http://publica.fraunhofer.de/documents/N-85742.html