Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

OPC UA supporting the automated engineering of production monitoring and control systems

 
: Schleipen, Miriam

:
Postprint urn:nbn:de:0011-n-821575 (999 KByte PDF)
MD5 Fingerprint: 86d948a9b44c53e7b7c75a972a27a9a9
© 2008 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Created on: 28.8.2009


Institute of Electrical and Electronics Engineers -IEEE-:
13th IEEE International Conference on Emerging Technologies and Factory Automation 2008 : 15 - 18 September 2008, Hamburg, Germany; Proceedings
New York, NY: IEEE, 2008
ISBN: 1-4244-1506-3
pp.640-647
International Conference on Emerging Technologies and Factory Automation (ETFA) <13, 2008, Hamburg>
English
Conference Paper, Electronic Publication
Fraunhofer IITB ( IOSB) ()

Abstract
Control systems monitor and control production plants and manufacturing systems. Before they can be taken into operation, they have to be configured. To automate this process, which is called engineering, a standardized exchange format is required that forms the basis of the work of all those who are involved in the project and that is understood by anyone involved. In addition, the contents to be exchanged have to be transmitted on the basis of a standardized communication mechanism with maximum efficiency. This article will present a standardized communication method capable of fulfilling these requirements. On the basis of an OPC UA framework acting as a communication, synchronization and processing mechanism, the opportunities of the Unified Architecture and its application in the automated engineering of Control systems will be evaluated.

: http://publica.fraunhofer.de/documents/N-82157.html