Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Cross wedge rolling used for preforming of titanium aero engine vanes

Querkeilwalzen zum Zwischenformen von Triebwerkschaufeln aus Titanlegierungen
 
: Neugebauer, Reimund; Lorenz, B.; Steger, J.; Holstein, D.

:
Fulltext urn:nbn:de:0011-n-821303 (178 KByte PDF)
MD5 Fingerprint: 109f5e7a73e97056999b9ab92ae788fa
Created on: 20.4.2011


Pietrzyk, M. ; Akademia Gorniczo-Hutnicza -AGH-, Krakau:
12th International Conference on Metal Forming 2008 : September 21-24, 2008, Krakau, Polska
Duesseldorf: Verlag Stahleisen, 2008 (Steel research international 79.2008, Special Edition)
ISBN: 978-3-514-00754-3
pp.375-381
International Conference on Metal Forming <12, 2008, Krakau>
English
Conference Paper, Journal Article, Electronic Publication
Fraunhofer IWU ()
cross wedge rolling; preforming; resource management; titanium; Querkeilwalzen; Masseverteilungszwischenform; Titanlegierung

Abstract
Intermediate forming aimed at distributing the material volume contributes towards better utilization of the material, reducing the amount of energy necessary for heating and improving quality by near-net-shape geometries. A range of different forming operations exists for realizing material distribution.
This paper gives an overview of the process technologies used for distributing the material in an intermediate forming stage in the closed die forging of aero engine vanes and also illustrates their application areas. The development of a single cross wedge rolling operation will save two upsetting operations and one extrusion operation. A considerable reduction in cycle times and in manufacturing costs is the result of the shortened process chain. Additionally, the number of ancillary processes, such as heating, adjustment and lubricant application are reduced as well.

: http://publica.fraunhofer.de/documents/N-82130.html