Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Laser sintering of alumina slurries

Lasersintern von Tonerdeschlamm
 
: Klocke, F.; Derichs, C.; Ader, C.

Vollertsen, F. ; Wissenschaftliche Gesellschaft Lasertechnik -WLT-:
Lasers in manufacturing 2007 : Proceedings of the Fourth International WLT-Conference Lasers in Manufacturing, LIM 2007, Munich, Germany, June 18th - 22nd, 2007
Stuttgart: AT-Fachverlag, 2007
ISBN: 978-3-00-021449-3
pp.225-229
International Conference on Lasers in Manufacturing (LIM) <4, 2007, München>
English
Conference Paper
Fraunhofer IPT ()
Tonerdesilicat; Schichtstruktur; Laserschmelzen; Sintern; keramischer Werkstoff; Porosität; Schlamm; Simulationsmodell; experimentelle Untersuchung; Wissenserfassung

Abstract
Since the middle of the 80s, layer manufacturing technologies have assisted the product development at various stages from the operational point of view. By now laser sintering is known as a powder-based layer manufacturing technology. Laser sintering of ceramic material has been investigated academically for years. As laser sintered bodies are porous correlating with a comparatively low strength, industrial use is still limited. This paper provides a knowledge base for laser sintering of Alumina slurries. Therefore a model of the slurry laser sintering process based on system analysis is generated, which is sub-divided into a drying and a process model. Furthermore experimental investigations with high-performance alumina slurries are conducted in order to approve the estimations of the model.
Entnommen aus TEMA

: http://publica.fraunhofer.de/documents/N-70195.html