Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Gesteuerte, partielle Beeinflussung des Werkstoffflusses zur Erweiterung der Umformgrenzen beim Innenhochdruck-Blechumform-Prozess (IHB)

: Neugebauer, Reimund; Bahn, V.; Noack, S.

Kleiner, M. ; Deutsche Forschungsgemeinschaft -DFG-, Bonn:
DFG-Schwerpunktprogramm SPP 1098 - wirkmedienbasierte Fertigungstechniken zur Blechumformung. Abschlussbericht
Aachen: Shaker, 2006 (Berichte aus der Fertigungstechnik)
ISBN: 3-8322-5457-9
ISBN: 978-3-8322-5457-5
Book Article
Fraunhofer IWU ()
hydroforming; sheet hydroforming; multipoint cushion; multiple-point drawing; active media-based sheet metal forming; pressure; material flow; surface pressure; leakage; sealing

The use of the active media-based sheet hydroforming process results in advantages over conventional forming techniques that make this technology interesting for the production of components with a large surface area. In order to expand the range of applications for this method, the current limits must be extended and the obstacles eliminated. One important aspect here is finding a solution to the conflict between a reliable tool sealing and a controlled material flow, particularly in the filling and preforming phases of the hydroforming process. One way of achieving progress in this area is to employ multipoint technology. In order to exploit multipoint cushion technology - the potential of which has been proved in conventional deep-drawing operations - to extend the limits of sheet hydroforming, this technology has to be developed further, similarly to the multipoint cushion systems used in deep-drawing, and adapted to the process-specific conditions of sheet hydroforming.