Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Electroplated Copper Metal Contacts on Perovskite Solar Cells

 
: Hatt, T.; Kabakli, Ö.; Schulze, P.; Richter, A.; Glunz, S.W.; Glatthaar, M.; Goldschmidt, J.C.; Bartsch, J.

:
Fulltext ()

Solar RRL 5 (2021), No.9, Art. 2100381, 6 pp.
ISSN: 2367-198X
English
Journal Article, Electronic Publication
Fraunhofer ISE ()
Photovoltaik; Silicium-Photovoltaik; Perowskit- und Organische Photovoltaik; Perowskitsolarzellen und -module; Perowskit-Silicium Tandem-Photovoltaik

Abstract
Electroplated copper contacts on small-area single-junction perovskite solar cells (PSCs) using an atomic layer deposited (ALD) Al2O3 masking layer on ITO are demonstrated for the first time. The photoconversion efficiency of ≈11% after manufacturing the Cu contacts confirms that PSCs can survive the wet-chemical plating process. From the successful realization of plated contact fingers, the creation of an electrical contact between the Cu electrode and the ITO on the FA0.75Cs0.25Pb(I0.8Br0.2)3 perovskite absorber is inferred. Furthermore, scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) analysis shows the formation of a compact interface between ITO and plated Cu. An additional plating approach, using self-passivated aluminum as mask, allows to produce well-defined 30 μm wide Cu contacts on the PSC. Such a plating process allows for plating a low-resistive Cu grid simultaneously on both sides of a perovskite silicon heterojunction tandem solar cell with TCO, independent of substrate size.

: http://publica.fraunhofer.de/documents/N-640774.html