Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Shielded metal arc welding of 9%Ni steel using matching ferritic filler metal

: El-Batahgy, A.; Saiyah, A.; Khafagi, S.; Gumenyuk, A.; Gook, S.; Rethmeier, M.


Science and technology of welding and joining 26 (2021), No.2, pp.116-122
ISSN: 1362-1718
Journal Article
Fraunhofer IPK ()

Motivated by the tensile strength loss of 9%Ni steel arc welded joints made using Ni-based austenitic filler metals, the feasibility of maintaining the tensile strength using matching ferritic filler metal has been demonstrated. In comparison with shielded metal arc welded joint made using Ni-based austenitic electrode ENiCrMo-6, higher tensile strength comparable to that of the base metal was obtained using matching ferritic electrode. Besides, sufficient impact toughness energies with much lower mismatch were obtained for weld metal and heat-affected zone. Welded joint with a lower mechanical mismatching is of considerable importance for achieving acceptable combination of tensile strength and impact toughness. A better combination of these mechanical properties is ensured by applying a post weld heat treatment.