Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Investigations on the influence of local material properties of burr formation

: Dix, M.; Leopold, J.; Neugebauer, Reimund

Preprint urn:nbn:de:0011-n-632842 (1.4 MByte PDF)
MD5 Fingerprint: ff0ed61ffe1602895f92c45f7343ff1f
Created on: 25.3.2011

Micari, F.; Filice, L. ; University of Calabria, Rende:
10th CIRP International Workshop on Modeling of Machining Operations. Proceedings : August 27-28, 2007, Reggio Calabria, Italy
Rende: University of Calabria, Department of Mechanical Engineering, 2007
ISBN: 978-88-95267-04-3
International Workshop on Modeling of Machining Operations <10, 2007, Reggio Calabria>
Conference Paper, Electronic Publication
Fraunhofer IWU ()
burr formation; material modification; finite element simulation; experimental investigation; Gratbildung; Materialeinfluss; Finite-Elemente-Simulation; experimentelle Untersuchung

The modern manufacturing has high demands on the cutting process. Today, the precision of the arising workpiece and the by-products of the machining process are one of the main parts of research. Burrs are some of the by-products. They result from the deformation of the workpiece material near the workpiece edge caused by the forces of the cutting process. The removal of this by-product requires a big partial amount of the manufacture costs. Fraunhofer Institute for Machine Tools and Forming Technologies deals with a new valuation of burr reducing.