Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Improvement of micro-cutting accuracy by in-process application of 3D-sensors

 
: Schubert, A.; Eckert, U.; Schulz, B.

:
Fulltext urn:nbn:de:0011-n-630419 (1.0 MByte PDF)
MD5 Fingerprint: 9266b004a7b699664c329629eca4a5ed
Created on: 30.3.2011


Thornett, E. ; European Society for Precision Engineering and Nanotechnology -EUSPEN-:
7th International Conference of the European Society for Precision Engineering and Nanotechnology 2007. Proceedings. Vol.2 : 20.-24.5.2007, Bremen
Bedford: Euspen, 2007
ISBN: 0-9553082-2-4
ISBN: 978-0-9553082-2-2
pp.368-371
European Society for Precision Engineering and Nanotechnology (EUSPEN International Conference) <7, 2007, Bremen>
English
Conference Paper, Electronic Publication
Fraunhofer IWU ()
micro manufacturing; micro cutting; accuracy; in-process measurement; 3D-sensor; Mikrofertigung; Mikrozerspanung; Genauigkeit; In-Prozess Messtechnik; 3D-Sensor

Abstract
The German BMBF-supported joint project "3D-Mikro" [1] aims to the integration of 3D-coordinate measurement equipment into highest precision machine tools. By in-process measuring of tool geometries and workpiece structures the uncertainties resulting from multiple clamping should be eliminated or at least diminished. The main focus of the research activities at Fraunhofer IWU is the investigation and adaptation of suitable non-contact working sensors for pre-measuring of the micro-cutting tool and the micro-workpiece. In this article some selected results of the running test program are shown.

: http://publica.fraunhofer.de/documents/N-63041.html