Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

A 2D Model for Interfacial Recombination in Mesoscopic Perovskite Solar Cells with Printed Back Contact

 
: Wagner, L.; Qiu, C.; Unmüssig, M.; Bogachuk, D.; Mastroianni, S.; Würfel, U.; Hu, Y.; Han, H.; Hinsch, A.

:
Fulltext urn:nbn:de:0011-n-6249136 (1.6 MByte PDF)
MD5 Fingerprint: 797ef4dcb4f0bb74e171241705a742ea
(CC) by
Created on: 23.2.2021


Solar RRL 5 (2021), No.1, Art. 2000595, 13 pp.
ISSN: 2367-198X
English
Journal Article, Electronic Publication
Fraunhofer ISE ()
Photovoltaik; Neuartige Photovoltaik-Technologie; Farbstoff- und Perowskitsolarzellen

Abstract
A physical model to explain the 2D charge recombination in mesoscopic graphite‐based perovskite solar cells (PSCs) having a highly selective front electrode and a nonselective back electrode is presented. Steady‐state photovoltage and photoluminescence (PL) as well as transient PL are studied for a wide range of device configurations, providing insights in the interface recombination at the front and back contact, namely, the mesoporous titania (m‐TiO2) and the graphite layer. Combining experimental evidence with the first 2D simulation of a perovskite solar cell, it is found that the characteristic thick absorber layer of mesoscopic graphite‐based PSC is a necessity to enhance the photovoltage. This is because the interface recombination at the back contact is a diffusion‐limited process. The electrode spacing should, however, not be enhanced by increasing the perovskite/m‐TiO2 thickness as this increases surface recombination losses at this interface. The study determines design rules for the optimal geometry of the mesoporous layers and helps to identify the limiting recombination pathways for an improvement of future device architectures.

: http://publica.fraunhofer.de/documents/N-624913.html