Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Dual-Heteroatom-Doped Reduced Graphene Oxide Sheets Conjoined CoNi-Based Carbide and Sulfide Nanoparticles for Efficient Oxygen Evolution Reaction

 
: Zakaria, Mohamed Barakat; Zheng, Dehua; Apfel, Ulf-Peter; Nagata, Takahiro; Kenawy, El-Refaie S.; Lin, Jianjian

:

ACS applied materials & interfaces 12 (2020), No.36, pp.40186-40193
ISSN: 1944-8244
ISSN: 0013-936X
ISSN: 1944-8252
English
Journal Article
Fraunhofer UMSICHT Oberhausen ()
radiology; composites; solution chemistry; two dimensional materials; electrodes; layered hybrids; annealing; heterostructured electrodes; functional nanomaterials; electrocatalysis; energy conversion

Abstract
Intensive research is being conducted into highly efficient and cheap nanoscale materials for the electrocatalytic oxidation of water. In this context, we built heterostructures of multilayered CoNi-cyanide bridged coordination (CoNi-CP) nanosheets and graphene oxide (GO) sheets (CoNi-CP/GO) as a source for heterostructured functional electrodes. The layered CoNi-CP/GO hybrid components heated in nitrogen gas (N2) at 450 °C yield CoNi-based carbide (CoNi-C) through thermal decomposition of CoNi-CP, while GO is converted into reduced GO (rGO) to finally form a CoNi-C/rGO-450 composite. The CoNi-C/rGO-450 composite shows a reasonable efficiency for oxygen evolution reaction (OER) through water oxidations in alkaline solution. Meanwhile, regulated annealing of CoNi-CP/GO in N2 with thiourea at 450 and 550 °C produces CoNi-based sulfide (CoNi-S) rather than CoNi-C between rGO sheets co-doped by nitrogen (N) and sulfur (S) heteroatoms (NS-rGO) to form CoNi-S/NS-rGO-450 and CoNi-S/NS-rGO-550 composites, respectively. The CoNi-S/NS-rGO-550 shows the best efficiency for electrocatalytic OER among all electrodes with an overpotential of 290 mV at 10 mA cm–2 and a Tafel slope of 79.5 mV dec–1. By applying the iR compensation to remove resistance of the solution (2.1 Ω), the performance is further improved to achieve a current density of 10 mA cm–2 at an overpotential of 274 mV with a Tafel slope of 70.5 mV dec–1. This result is expected to be a promising electrocatalyst compared to the currently used electrocatalysts and a step for fuel cell applications in the future.

: http://publica.fraunhofer.de/documents/N-615695.html