Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

13-Gb/s Transmitter for Bunch of Wires Chip-to-Chip Interface Standard

 
: Chaudhary, Muhammad Waqas; Heinig, Andy; Choubey, Bhaskar

:
Postprint urn:nbn:de:0011-n-6030768 (975 KByte PDF)
MD5 Fingerprint: 50781fc59c76a2b4b568b20d0f97b075
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Created on: 24.9.2020


Institute of Electrical and Electronics Engineers -IEEE-:
IEEE 63rd International Midwest Symposium on Circuits and Systems, MWSCAS 2020 : August 9 - 12, 2020, Springfield, MA, USA, On-line Proceedings
Piscataway, NJ: IEEE, 2020
ISBN: 978-1-7281-8058-8
ISBN: 978-1-7281-8059-5
ISBN: 978-1-5386-2916-1
pp.333-336
International Midwest Symposium on Circuits and Systems (MWSCAS) <63, 2020, Online>
European Commission EC
10037523; ARAMID
radAR für AutonoMes fahren - einsetzbar für jeDermann
English
Conference Paper, Electronic Publication
Fraunhofer IIS, Institutsteil Entwurfsautomatisierung (EAS) ()
bunch of wires; Co-Design; multi-chip communication; transmitter

Abstract
Continuous downscaling of integrated circuits has reached a bottleneck. Technologies such as system in a package, multi-chip module and integration of chips on an active or passive interposer can further improve the system performance. Bunch of wires interface standard was recently introduced for chip to chip short interfaces within a package. This standard required both terminated and unterminated driver topologies for different data rates and interconnect lengths. This paper presents a first ever reported transmitter implementation of this interface. Unterminated and terminated impedance controlled drivers with feedback calibration enable transmitter power optimization for a given interconnect based on the respective signal integrity at the receiver side. Results show that this transmitter can support both low and high speed low power communication between chips for interconnects up to 11mm length with energy consumption of 0.34pJ/bit at maximum data rate of 13Gb/s. The transmitter is designed and taped out in 22nm FDSOI technology node.

: http://publica.fraunhofer.de/documents/N-603076.html