Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Fabrication of metallic multi-material components using Laser Metal Deposition

 
: Brueckner, F.; Riede, M.; Mueller, M.; Marquardt, F.; Knoll, M.; Willner, R.; Seidel, A.; Lopez, E.; Leyens, C.; Beyer, E.

:
Fulltext ()

Univ. of Texas, Austin:
28th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference 2017. Online resource : University of Texas, Austin, August 7-9, 2017
Austin/Tex., 2017
http://utw10945.utweb.utexas.edu/TOC2017
pp.2530-2538
Annual International Solid Freeform Fabrication Symposium (SFF) <28, 2017, Austin/Tex.>
English
Conference Paper, Electronic Publication
Fraunhofer IWS ()

Abstract
Meanwhile, Laser Metal Deposition (LMD) is a well-known Additive Manufacturing technology used in various industrial branches as energy, tooling or aerospace. It can be used for the fabrication of new components but also repair applications. So far, volume build-ups were mostly carried out with one single material only. However, loading conditions may strongly vary and, hence, the use of more than one material in a component would yield major benefits. By means of multi-material build-ups, cost-intensive alloys could be used in highly-loaded areas of the part, whereas the remaining part could be fabricated with cheaper compositions. The selection of combined materials strongly depends on the requested thermo-physical and mechanical properties. Within this contribution, possibilities of material combinations by LMD and selected examples of beneficial multi-material use are presented.

: http://publica.fraunhofer.de/documents/N-596270.html