Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Novel SERS-based process analysis for label-free segmented flow screenings

 
: Mendl, Alexander; Köhler, Michael; Bošković, Dušan; Löbbecke, Stefan

:
Fulltext urn:nbn:de:0011-n-5930293 (3.0 MByte PDF)
MD5 Fingerprint: f292007e4da364a37afe3c1a2af6fec8
(CC) by-nc
Created on: 11.6.2020


LAB on a chip 20 (2020), No.13, pp.2364-2371
ISSN: 1473-0197
ISSN: 1473-0189
English
Journal Article, Electronic Publication
Fraunhofer ICT ()
SERS

Abstract
In microfluidic segmented flow processes label-free analytical techniques like surface enhanced Raman spectroscopy (SERS) can reveal the chemical composition of the individual droplet contents. The SERS system developed in this work enables a simple connection to micro segmented flow processes through miniaturization. The concept is based on the parallelization of silver/polyacrylamide composite SERS spots on a carrier plate on which the segments are deposited. The transfer of the segments allows an easy connection to existing flow processes and provides optimal conditions for Raman measurements using miniaturized spectrometers. The preparation of the SERS polymer composite was optimized in terms of the silver content in the polymer matrix to obtain a high SERS signal. The performance and long-term stability of the polymer have been successfully demonstrated. The deamination of adenine with sodium nitrite to hypoxanthine was chosen as a case study to demonstrate the capability of the novel SERS-based process analysis. A sequence of approximately one hundred segments in combination with a gradient of the nitrite concentration (0 to 0.4 mol L−1) was generated at two temperatures. The concentration of adenine and hypoxanthine were determined by using a multivariate calibration model, since the Raman spectra of both substances are overlapping. It was shown that the conversion of adenine is increased with higher nitrite concentration and temperature. A conversion of 35% was obtained at 50 °C and a conversion of 60% at 80 °C, respectively.

: http://publica.fraunhofer.de/documents/N-593029.html