Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Air-Con Metal-Organic Frameworks in Binder Composites for Water Adsorption Heat Transformation Systems

 
: Gökpinar, S.; Ernst, S.-J.; Hastürk, E.; Möllers, M.; El Aita, E.; Wiedey, R.; Tannert, N.; Nießing, S.; Abdpour, S.; Schmitz, A.; Quodbach, J.; Füldner, G.; Henninger, S.; Janiak, C.

:

Industrial and Engineering Chemistry Research 58 (2019), No.47, pp.21493-21503
ISSN: 0888-5885
ISSN: 1520-5045
English
Journal Article
Fraunhofer ISE ()
Thermische Systeme und Gebäudetechnik; adsorption; adsorption chiller; adsorption heat pump; adsorption kinetics; adsorptive coating; heat pump; MOF; energieeffizientes Gebäude; Lüftungs- und Klimatechnik; Wärmepumpe

Abstract
Metal–organic frameworks (MOFs) currently receive high interest for cycling water adsorption applications like adsorption heat transformation for air-conditioning purposes. For practical use in adsorption heat pumps (AHPs), the microcrystalline powders must be formulated such that their high porosity and pore accessibility are retained. In this work, the preparation of millimeter-scaled pellets of MIL-160(Al), Al-fumarate (Basolite A520), UiO-66(Zr), and Zr-fumarate (MOF-801) is reported by applying the freeze granulation method. The use of poly(vinyl alcohol) (PVA) as a binder reproducibly resulted in highly stable, uniformly shaped PVA/MOF pellets with 80 wt % MOF loading, with essentially unchanged MOF porosity properties after shaping. The shaped pellets were analyzed for the application in AHPs by water adsorption isotherms, over 1000 water adsorption/desorption cycles, and thermal and mechanical stability tests. Furthermore, the Al-fum pellets were applied in a fixed-bed, full-scale heat exchanger, yielding specific cooling powers from 349 up to 431 W/kg (adsorbent), which outperforms the current commercially used silica gel grains in AHPs under comparable operating conditions.

: http://publica.fraunhofer.de/documents/N-586703.html