Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Evaluation of the influence of different inner cores on the dynamic behavior of boring bars

 
: Thorenz, Benjamin; Friedrich, Markus; Westermann, Hans-Henrik; Döpper, Frank

:
Fulltext urn:nbn:de:0011-n-5857250 (1.1 MByte PDF)
MD5 Fingerprint: 626a1756d8cf337b6d094f6bdba5a317
(CC) by-nc-nd
Created on: 21.4.2020


Procedia CIRP 81 (2019), pp.1171-1176
ISSN: 2212-8271
Conference on Manufacturing Systems (CMS) <52, 2019, Ljubljana>
English
Journal Article, Conference Paper, Electronic Publication
Fraunhofer IPA ()
Drehen; Kohlefaserverbundwerkstoff; faserverstärkter Kunststoff; Schwingung

Abstract
The material removal rate (MRR) must be increased in order to improve productivity in cutting operations. Here, the achievable maximum is usually limited by induced vibrations caused by dynamic load peaks in high force applications. Boring bars, typically used in internal turning processes, are characterized by a high length-to-diameter ratio, which makes them particularly vulnerable to vibrations. This paper therefore examines the influence of different inner cores inserted in boring bars, consisting of carbon fibre reinforced plastics, on the dynamic behavior using finite element analysis, experimental modal analysis and machining tests, and discusses the results in terms of increasing the MRR.

: http://publica.fraunhofer.de/documents/N-585725.html