Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Strategies for embedding of active components

 
: Ostmann, A.; Manessis, D.; Löher, T.; Neumann, A.; Reichl, H.

:

Institute of Electrical and Electronics Engineers -IEEE-:
International Microsystems, Packaging, Assembly Conference Taiwan 2006 : Taipei, Taiwan, October 18-20, 2006
Piscataway, NJ: IEEE, 2006
ISBN: 1-4244-0734-6
ISBN: 1-4244-0735-4
4 pp.
International Microsystems, Packaging, Assembly Conference <2006, Taipei, Taiwan>
English
Conference Paper
Fraunhofer IZM ()

Abstract
Innovative technologies for the realization of packages and System-in-Packages (SIP) with embedded components will be described. Embedding of semiconductor chips into substrates has several advantages. At first it allows a very high degree of miniaturization, since multiple layers of embedded components can be sequentially stacked. A further advantage is the beneficial electrical performance by short and geometrically well controlled interconnects. Furthermore the embedding gives a homogeneous mechanical environment of the chips, resulting in good reliability. The development of different technologies for component embedding will be described. One technology, called "Chip in Polymer", uses thin chips which are die bonded and embedded by lamination of Resin Coated Copper (RCC) layers. The electrical contacts are made by laser drilling and Cu metallization. An other approach, which is mainly of interest for flexible substrates, uses flip chips with very thin interconnect. The chips are soldered or glued to flex substrates, followed by embedding in an adhesive layer. Both technologies result in chips which are fully integrated in a flat substrate, either rigid or flex. In both cases further layers an be applied or other components can be conventionally assembled on top.

: http://publica.fraunhofer.de/documents/N-58416.html