Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Manufacturing of All Inkjet-Printed Organic Photovoltaic Cell Arrays and Evaluating their Suitability for Flexible Electronics

Herstellung vollständig Inkjet gedruckter organischer Solarzellen-Anordnungen und Evaluierung ihrer Eignung für flexible Elektronik
 
: Mitra, Kalyan Yoti; Alalawe, Abdelrahman; Voigt, Stefanie; Boeffel, Christine; Baumann, Reinhard R.

:
Fulltext ()

Micromachines 9 (2018), No.12, Art. 642, 20 pp.
ISSN: 2072-666X
Bundesministerium für Bildung und Forschung BMBF (Deutschland)
03EK3529; EPOS
Erforschung, Entwicklung und Integration materialeffizienter Prozesstechnologien für zukünftige Anwendungen von semi-transparenter Flex-OPV
English
Journal Article, Electronic Publication
Fraunhofer IAP ()
organic photovoltaics; flexible electronics; indium tin oxide (ITO); free solar cells; inkjet technology

Abstract
The generation of electrical energy depending on renewable sources is rapidly growing and gaining serious attention due to its green sustainability. With fewer adverse impacts on the environment, the sun is considered as a nearly infinite source of renewable energy in the production of electrical energy using photovoltaic devices. On the other end, organic photovoltaic (OPV) is the class of solar cells that offers several advantages such as mechanical flexibility, solution processability, environmental friendliness, and being lightweight. In this research, we demonstrate the manufacturing route for printed OPV device arrays based on conventional architecture and using inkjet printing technology over an industrial platform. Inkjet technology is presently considered to be one of the most matured digital manufacturing technologies because it offers inherent additive nature and last stage customization flexibility (if the main goal is to obtain custom design devices). In this research paper, commercially available electronically functional inks were carefully selected and then implemented to show the importance of compatibility between OPV material stacks and the device architecture. One of the main outcomes of this work is that the manufacturing of the OPV devices was accomplished using inkjet technology in massive numbers ranging up to 1500 containing different device sizes, all of which were deposited on a flexible polymeric film and under normal atmospheric conditions. In this investigation, it was found that with a set of correct functional materials and architecture , a manufacturing yield of more than 85% could be accomplished, which would reflect high manufacturing repeatability, deposition accuracy, and processability of the inkjet technology.

: http://publica.fraunhofer.de/documents/N-575189.html